Note: These rifles produce significantly more power than beginner BB guns and can be dangerous. Always ensure you have a safe backstop and are certain of your target before shooting. High-powered break barrels can be challenging to shoot accurately.

<h3 id="isPasted">Sniper Rifle, 1300, 1200 FAQs</h3><h4 id="how-do-i-operate-my-break-barrel">How Do I Operate My Break Barrel?</h4><ol><li>Engage the safety.</li><li>Securely hold the rifle.</li><li>Tap the muzzle to break open the action, then pull it down until it clicks into place. Keep control of the barrel with one hand.</li><li>Insert a pellet into the breech with your other hand, ensuring it is properly seated.</li><li>Swing the barrel back into place.</li><li>Disengage the safety, aim, and fire.</li></ol>Note: These rifles produce significantly more power than beginner BB guns and can be dangerous. Always ensure you have a safe backstop and are certain of your target before shooting.<hr><h4 id="how-do-i-use-the-sights-correctly">How Do I Use the Sights Correctly?</h4><ul><li>Iron Sights: Align the front sight dot between the two dots on the rear sight, with the target just above the sight picture. Adjust the rear sight in the direction you need to shoot (e.g., if shooting too far left, adjust the rear sight to the right).</li><li>Scope: Adjust the turrets in the direction you need to shoot. For example, if shooting low and to the left, turn the turrets up and to the right.</li></ul><hr><h4 id="how-can-i-improve-accuracy">How Can I Improve Accuracy?</h4>High-powered break barrels can be challenging to shoot accurately. Follow these tips:<ol><li>Ensure all stock screws are snug.</li><li>Experiment with different holds and find a consistent grip that works for you. Research what is called the artillery hold and build from there.</li><li>Test various pellet types&#x2014;medium-weight pellets typically offer better accuracy than very light or heavy pellets.</li><li>Break in the rifle with 500&#x2013;1,000 shots to burn off factory lubrication and allow components to settle.</li><li>If accuracy suddenly worsens, check stock screws, sight screws, scope ring screws, and inspect your scope (use only airgun-rated scopes). Airgun rated scopes often do wear out on a break barrel over time.</li></ol><hr><h4 id="how-do-i-adjust-the-trigger">How Do I Adjust the Trigger?</h4><ul><li>The trigger may have an adjustment screw located behind it, which can be safely adjusted.</li><li>Do not replace this screw with a longer one or adjust other screws, as this could create unsafe conditions and void your warranty.</li></ul>Note: The rifle comes with a 1-year warranty. Do not tamper with or disassemble the gun, as this may void the warranty.<hr><h4 id="what-should-i-do-if-my-gun-isnt-working">What Should I Do If My Gun Isn&#x2019;t Working?</h4><ul><li>Stop using the rifle immediately if you experience cocking issues or sudden changes in trigger pull&#x2014;these can indicate dangerous wear.</li><li>Contact an authorized service center for repairs. Do not attempt to disassemble the rifle yourself, as the mainspring or gas strut is under high tension and requires specialized tools.</li><li>If your rifle is within the 1-year warranty, contact <a rel="noopener">help@barraairguns.com</a> for assistance with proof of purchase and details about the issue.</li></ul><hr><h4 id="can-i-get-replacement-parts-for-my-rifle">Can I Get Replacement Parts for My Rifle?</h4>Yes, replacement parts are available:<ul><li>If your rifle is under warranty, defective parts can be replaced free of charge.</li><li>If it&#x2019;s not under warranty, some parts might be purchased. Please note that many of the dangerous components to replace are not going to be available. This would include the piston and seals as well as trigger components. To request parts, provide your order number or receipt (showing date and price), serial number, and mailing address to <a rel="noopener">help@barraairguns.com</a>.</li></ul><hr><h4 id="sound-suppression-and-noise-information">Sound Suppression and Noise Information</h4><ul><li>Rifles like the Sniper series and TPR 1300 include sound suppression, which cannot be removed without voiding the warranty. Models like the 1200g and TPR 1200 do not include sound suppression and are not designed for aftermarket suppressors.</li><li>Initial shots may be loud as factory lubrication burns off. Lightweight pellets (sub 7.6 grain for .177 or sub 12 grain for .22) can cause supersonic speeds, resulting in a sonic crack. For quieter operation, use heavier pellets.</li></ul>

Sniper Rifle, 1300, 1200 FAQs

Engage the Safety. Break Open the Action. Load the Pellet. Close the Barrel. Fire the Rifle. Note: These rifles produce significantly more power than beginner BB guns and can be lethal. Always ensure you have a clear target and an adequate backstop b

<h3 id="isPasted">How to Operate Your Rifle</h3><ol><li>Engage the Safety<ul><li>Before handling your rifle, ensure the safety is engaged.</li></ul></li><li>Break Open the Action<ul><li>Hold the rifle securely.</li><li>Tap the muzzle to break open the action, then firmly pull it down until it clicks into place.</li></ul></li><li>Load the Pellet<ul><li>Insert a pellet into the breech and ensure it is properly seated.</li></ul></li><li>Close the Barrel<ul><li>Swing the barrel back into place until it locks securely.</li></ul></li><li>Fire the Rifle<ul><li>Disengage the safety, aim, and fire.</li></ul></li></ol>Note: These rifles produce significantly more power than beginner BB guns and can be lethal. Always ensure you have a clear target and an adequate backstop before shooting.<hr><h4 id="using-your-sights">Using Your Sights</h4>This gun is designed for scope only, there are no easy, straightforward solutions for adding iron sights to this airgun. If you need iron sights, consider the TPR 1200 instead.<ul><li>Scopes: Adjust the scope turrets in the direction you need to shoot.<ul><li>If your shots are low and to the left, turn the turrets up and to the right.</li></ul></li></ul><hr><h4 id="tips-for-accuracy">Tips for Accuracy</h4>High-powered break barrels require practice and proper technique for accuracy. If you are unfamiliar with shooting high-powered airguns, consider practicing with multipumps or firearms first.<ol><li>Check the Stock Screws: Ensure all stock screws are snug. Loose screws can impact accuracy.</li><li>Consistent Hold: Experiment with different holds to find the most accurate position and grip. Be consistent with your technique, including how tightly you hold the rifle and where your hand is positioned on the fore end.</li><li>Choose the Right Ammunition:<ul><li>Use pellets that fit securely in your barrel (neither too loose nor too tight).</li><li>Medium-weight pellets often provide better accuracy than extremely light or heavy ones.</li></ul></li><li>Monitor Scopes:<ul><li>Sudden accuracy loss can indicate a failing scope.</li><li>Use only airgun-rated scopes, as the recoil from break barrels can damage standard scopes over time. Airgun rated scopes do wear out and need to be replaced, so don&apos;t rule out scope issues even if you do have an airgun rated scope.</li></ul></li><li>Break-In Period: Most break barrels require a break-in period of 500 to 1,000 shots to burn off excess factory lubrication and allow mechanical parts to settle.</li></ol><hr><h4 id="trigger-adjustment">Trigger Adjustment</h4>Some rifles include a trigger adjustment screw to modify trigger travel or the first stage pull length.<ul><li>Keep track of how many turns you make and in which direction to revert to the original setting if needed.</li><li>Adjusting the screw behind the trigger is ok, it adjust pull weight.</li><li>Adjusting the screw on the trigger isn&apos;t recommended as it reduces sear engagement.</li><li>Warning: Do not replace either screw with a longer one, as this can make the trigger unsafe.</li></ul><hr><h4 id="important-maintenance-and-warranty-notes">Important Maintenance and Warranty Notes</h4><ul><li>Do Not Disassemble Your Rifle: Attempting repairs or modifications can void the 1-year limited warranty. These rifles contain highly tensioned mainsprings or gas struts, requiring specialized tools for safe disassembly.</li><li>Faulty Guns: If your rifle has cocking issues or other faults, stop using it immediately.<ul><li>Have your rifle repaired by an authorized service center.</li></ul></li></ul>At Barra Airguns, we pride ourselves on delivering high-quality products. If you believe your rifle is defective, please contact us. All rifles come with a 1-year warranty.<h4 id="additional-resources">Additional Resources</h4>For step-by-step guides and maintenance tips, refer to our video resources:<ul><li><a href="https://www.youtube.com/@barraairguns" rel="noopener" target="_new">Barra&#xA0;Airguns&#xA0;YouTube&#xA0;Channel</a></li></ul>

1200g FAQ

Our customer service team is here to help with any questions you may have!

Have questions? Our customer service team is here to help! We'll get back to you as soon as possible.

Availability
Monday – Friday, 9 AM – 5 PM CST
Closed weekends 
Closed holidays (Dec 24, 25, 26, 31 & Jan 1)

Break Barrel Rifles

Sniper Rifle, 1300, 1200 FAQs

1200g FAQ