Barra Airguns logo
Barra Airguns logo
All articles

1200g FAQUpdated 2 months ago

How to Operate Your Rifle

  1. Engage the Safety

    • Before handling your rifle, ensure the safety is engaged.

  2. Break Open the Action

    • Hold the rifle securely.
    • Tap the muzzle to break open the action, then firmly pull it down until it clicks into place.

  3. Load the Pellet

    • Insert a pellet into the breech and ensure it is properly seated.

  4. Close the Barrel

    • Swing the barrel back into place until it locks securely.

  5. Fire the Rifle

    • Disengage the safety, aim, and fire.

Note: These rifles produce significantly more power than beginner BB guns and can be lethal. Always ensure you have a clear target and an adequate backstop before shooting.

Using Your Sights

This gun is designed for scope only, there are no easy, straightforward solutions for adding iron sights to this airgun. If you need iron sights, consider the TPR 1200 instead.

  • Scopes:
    Adjust the scope turrets in the direction you need to shoot.

    • If your shots are low and to the left, turn the turrets up and to the right.

Tips for Accuracy

High-powered break barrels require practice and proper technique for accuracy. If you are unfamiliar with shooting high-powered airguns, consider practicing with multipumps or firearms first.

  1. Check the Stock Screws:
    Ensure all stock screws are snug. Loose screws can impact accuracy.

  2. Consistent Hold:
    Experiment with different holds to find the most accurate position and grip. Be consistent with your technique, including how tightly you hold the rifle and where your hand is positioned on the fore end.

  3. Choose the Right Ammunition:

    • Use pellets that fit securely in your barrel (neither too loose nor too tight).
    • Medium-weight pellets often provide better accuracy than extremely light or heavy ones.

  4. Monitor Scopes:

    • Sudden accuracy loss can indicate a failing scope.
    • Use only airgun-rated scopes, as the recoil from break barrels can damage standard scopes over time. Airgun rated scopes do wear out and need to be replaced, so don't rule out scope issues even if you do have an airgun rated scope.

  5. Break-In Period:
    Most break barrels require a break-in period of 500 to 1,000 shots to burn off excess factory lubrication and allow mechanical parts to settle.

Trigger Adjustment

Some rifles include a trigger adjustment screw to modify trigger travel or the first stage pull length.

  • Keep track of how many turns you make and in which direction to revert to the original setting if needed.
  • Adjusting the screw behind the trigger is ok, it adjust pull weight.
  • Adjusting the screw on the trigger isn't recommended as it reduces sear engagement.
  • Warning: Do not replace either screw with a longer one, as this can make the trigger unsafe.

Important Maintenance and Warranty Notes

  • Do Not Disassemble Your Rifle:
    Attempting repairs or modifications can void the 1-year limited warranty. These rifles contain highly tensioned mainsprings or gas struts, requiring specialized tools for safe disassembly.

  • Faulty Guns:
    If your rifle has cocking issues or other faults, stop using it immediately.

    • Have your rifle repaired by an authorized service center.

At Barra Airguns, we pride ourselves on delivering high-quality products. If you believe your rifle is defective, please contact us. All rifles come with a 1-year warranty.

Additional Resources

For step-by-step guides and maintenance tips, refer to our video resources:




Was this article helpful?
Yes
No