Sniper Rifle, 1300, 1200 FAQsUpdated 2 months ago

Sniper Rifle, 1300, 1200 FAQs

How Do I Operate My Break Barrel?

1. Engage the safety.
2. Securely hold the rifle.
3. Tap the muzzle to break open the action, then pull it down until it clicks into place. Keep control of the barrel with one hand.
4. Insert a pellet into the breech with your other hand, ensuring it is properly seated.
5. Swing the barrel back into place.
6. Disengage the safety, aim, and fire.

Note: These rifles produce significantly more power than beginner BB guns and can be dangerous. Always ensure you have a safe backstop and are certain of your target before shooting.

How Do I Use the Sights Correctly?

• Iron Sights: Align the front sight dot between the two dots on the rear sight, with the target just above the sight picture. Adjust the rear sight in the direction you need to shoot (e.g., if shooting too far left, adjust the rear sight to the right).
• Scope: Adjust the turrets in the direction you need to shoot. For example, if shooting low and to the left, turn the turrets up and to the right.

How Can I Improve Accuracy?

High-powered break barrels can be challenging to shoot accurately. Follow these tips:

1. Ensure all stock screws are snug.
2. Experiment with different holds and find a consistent grip that works for you. Research what is called the artillery hold and build from there.
3. Test various pellet types—medium-weight pellets typically offer better accuracy than very light or heavy pellets.
4. Break in the rifle with 500–1,000 shots to burn off factory lubrication and allow components to settle.
5. If accuracy suddenly worsens, check stock screws, sight screws, scope ring screws, and inspect your scope (use only airgun-rated scopes). Airgun rated scopes often do wear out on a break barrel over time.

How Do I Adjust the Trigger?

• The trigger may have an adjustment screw located behind it, which can be safely adjusted.
• Do not replace this screw with a longer one or adjust other screws, as this could create unsafe conditions and void your warranty.

Note: The rifle comes with a 1-year warranty. Do not tamper with or disassemble the gun, as this may void the warranty.

What Should I Do If My Gun Isn’t Working?

• Stop using the rifle immediately if you experience cocking issues or sudden changes in trigger pull—these can indicate dangerous wear.
• Contact an authorized service center for repairs. Do not attempt to disassemble the rifle yourself, as the mainspring or gas strut is under high tension and requires specialized tools.
• If your rifle is within the 1-year warranty, contact [email protected] for assistance with proof of purchase and details about the issue.

Can I Get Replacement Parts for My Rifle?

Yes, replacement parts are available:

• If your rifle is under warranty, defective parts can be replaced free of charge.
• If it’s not under warranty, some parts might be purchased. Please note that many of the dangerous components to replace are not going to be available. This would include the piston and seals as well as trigger components.
  To request parts, provide your order number or receipt (showing date and price), serial number, and mailing address to [email protected].

Sound Suppression and Noise Information

• Rifles like the Sniper series and TPR 1300 include sound suppression, which cannot be removed without voiding the warranty. Models like the 1200g and TPR 1200 do not include sound suppression and are not designed for aftermarket suppressors.
• Initial shots may be loud as factory lubrication burns off. Lightweight pellets (sub 7.6 grain for .177 or sub 12 grain for .22) can cause supersonic speeds, resulting in a sonic crack. For quieter operation, use heavier pellets.