How do I operate my rifle?. Why can't I get all 10 shells into my rifle?. I have a jammed shell. Why is my rifle faulty or not shooting?. How do I install my rifled barrel?

<h1 id="isPasted" style="text-align: center;">1866 CO2 Rifle FAQ</h1> How do I operate my rifle?<ul><li>Follow this video to learn how to install the CO2 and related topics: <a href="https://www.youtube.com/watch?v=_YFLJBHPhJU" id="isPasted">https://www.youtube.com/watch?v=_YFLJBHPhJU</a></li><li>Load your pellet shells with ammunition. Use the correct caliber of pellet for your shells and barrel. Light to medium weight pellets are best suited for this rifle. Load up to 10 shells in the side loading port.</li><li>Work the lever fully forward, then fully backward in a smooth motion to eject, load, and chamber a shell. There is a lever safety that requires the lever to be pressed against the grip in order for a shot to be fired.</li><li>How to safely store your 1866 CO2 / remove CO2: <a href="https://www.youtube.com/watch?v=fQ_ciBK3Ue8" id="isPasted">https://www.youtube.com/watch?v=fQ_ciBK3Ue8</a></li></ul><hr>Why can&apos;t I get all 10 shells into my rifle?<ul><li>The spring can be stiff from the factory. Install as many shells as it will take without requiring excessive force, then leave it overnight to set the spring. If this doesn&apos;t work, then there is likely a defect causing this issue, reach out to customer service if that is the case.</li></ul><hr>I have a jammed shell<ul><li>Do not force the lever. If possible, degas the rifle as described in your owner&apos;s manual. Follow the <a href="https://www.youtube.com/watch?v=8Aexlba5Ac0" class="fr-strong" target="_blank" rel="noopener noreferrer">barrel replacement</a> video to remove the front section of the rifle from the action. Do not disassemble further than that. Attempt to remove the jammed shell from the action in this configuration, gently move the lever to assist in this process to gain access to the shell. Reassemble the rifle.</li><li>Avoid jams in the future by focusing on full, smooth forward and backward operation of the lever. Do not short stroke the action. Make sure your pellet shells are clean and smooth. Do not use damaged shells.</li></ul><hr>Why is my rifle faulty or not shooting?<ul><li>The two most likely reasons are the lever safety not being depressed, or the CO2 cylinders not being punctured. Locate the safety button under the lever. Pay attention to squeezing the lever slightly so that button is depressed.</li><li>For the CO2 cylinders, make sure you screw in the rear plug until you hear the cylinders puncture. You should hear a hiss. For best results, tighten until you encounter a slight resistance before the hiss. Reposition yourself to get a full turn on the screw. Rapidly tighten the screw as you hear the hiss, this process will give a greater probability of piercing both cartridges at the same time. Failure to do this usually results in the top cylinder from being pierced. If the bottom cylinder isn&apos;t piercing, the rifle will need warranty service.</li></ul><hr>How do I install my rifled barrel? &#xA0; &#xA0;&#xA0;<ul><li>When you purchase your rifled barrel kit, it will come with instructions on how to install your new rifled barrel.</li><li>You may also use the link provided to help install your rifled barrel. &#xA0;<a href="https://www.youtube.com/watch?v=8Aexlba5Ac0" id="isPasted">Unlock Better Performance: How to Upgrade Barra 1866 CO2 with Rifled Barrel | Step-by-Step Guide! (youtube.com)</a> </li></ul>

1866 CO2 Rifle FAQ

Our customer service team is here to help with any questions you may have!

Have questions? Our customer service team is here to help! We'll get back to you as soon as possible.

Availability
Monday – Friday, 9 AM – 5 PM CST
Closed weekends 
Closed holidays (Dec 24, 25, 26, 31 & Jan 1)

CO2 Rifles

1866 CO2 Rifle FAQ