400e Cleaning, Lubrication & Battery CareUpdated 2 months ago

⚠️ Important: Always ensure your rifle is unloaded and degassed before performing any cleaning or maintenance.

Cleaning

• Wipe all exterior surfaces with a dry microfiber cloth.
• To clean the barrel, watch this video: ▶️ How to Clean Your 400e Barrel
• Barrel cleaning does not need to be performed often. For best results:
  • Clean the barrel once when you first get the gun.
  • Never reuse ammo.
  • Do not add lubricants to BBs or your speed loader.
  • Clean only if you notice accuracy issues

Lubrication

• Apply a small amount of firearm lubricant to the magazine release mechanism. Wipe away excess.
• The gearbox is factory-greased and will stay lubricated until it requires a rebuild.
  • Rebuilds can be done by an airsoft technician.
  • Replacement parts and complete gearboxes are available on our website.
• Do not lubricate inside the inner barrel or the bucking.
• You may lightly lubricate the exterior of the inner barrel with firearm lubricant. Always wipe away extra.

Battery Care

• Never overcharge or over-discharge your battery.
• Do not store your battery fully charged or deeply discharged.
• If the battery becomes puffy or swollen, discontinue use and dispose of it safely.
• Always charge with a balance charger.
• Use a voltage alarm for easier battery management.
• Be mindful of the risks of LiPo batteries and handle with care.
• Never store your gun with the battery inside.
• Disconnect any voltage alarms from the battery during storage.